Lock Up Stage (Pre Plaster) Inspection Brisbane

A new home Lock Up Stage Inspection in Brisbane is an inspection of external wall claddings such as brickwork/rendered polystyrene/weatherboards. Roof claddings, fascia boards, bargeboards and gutters, external doors and windows, damage to specially coated surfaces, articulation joints, flashings and weepholes.

We recommend that this inspection is completed at pre plaster just prior to the lock-up stage to enable our inspectors to check the insulation to perimeter and internal walls, electrical wiring for correct location of light switches and power points, baths and shower bases correctly installed, frame damage caused by installation of electrical or plumbing pipes such as damage to bottom plates/studs, noggins and bracing.

The lock up stage inpection is the thrid of four new home stage inspections recommended by iSPECT Building Inspections:

1. Slab Stage
2. Frame Stage
3. Lockup
4. Completion

 

• We liaise with agents, vendors and property managers for access to a property.
• The Lock Up Stage inspection report in Brisbane is completed out in accordance with AS4349. 1-2007 and local Brisbane QLD standards.
• Lock Up Stage Inspection Reports are completed digitally and emailed in PDF format within 24 hours of inspection.
• iSPECT Inspectors in Brisbane are Queensland Building & Construction Commission (QBCC) registered and quaified, with no restrictions.

Lock up (Pre Plaster - Waterproofing) Stage Inspection Cost